Included in the package, you will find the body of rabbit, 1 airpath, 2 feet, 1 power cord, and multiple screws.

You need to take the first foot with the power port and place it on an even surface. Remove the safety label and release the lock.

Install the black base onto a wall near the power source. Double-sided tape is only applicable to glass surfaces or when fewer than 3 airpaths are needed. In any other case, the use of screws is mandatory to prevent falling when installing the foot.

Install Foot No.1 on top of the base and adjust it to the desired angle. If the planned installation distance is long, you need to fix the foot’s link controller facing slightly upwards.

Install Foot No.2 following the same process.

Take out rabbit with the airpath using both hands.

Connect one end to a foot, and then connect the remaining airpaths.

You can install all the airpath on one side first, and then connect the final end to the second base. Don’t forget to remove the protective stickers.

Finally, power up rabbit. After rabbit is powered on, it will respond and inflate automatically.

Please follow the instructions to download the app and connect rabbit to your Wi-Fi.

Say “Hey rabbit” to your device. After rabbit replies with sound, the voice-recognition setup is ready to use.

Raise your hand and place it next to your head to activate gesture control. Upon activation, rabbit will respond with sound.

You can then use gestures to adjust brightness, color temperature, lighting concentration, and lighting angles. rabbit will automatically save your preferred setup.